5 changing a memory frequency, Caution, 3) recalling a memory frequency – ADI Systems AT-201 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Moving a Memory Frequency to the VFO
[C/VSCAN Button]
In the memory mode the [CA/SCAN] button will put the
current operating frequency (including offset and tone) into
the VFO.
(^Information)
If you wish to return to VFO mode and do not want to use the
current operating frequency, press the [MR/ENT] button, this
will return you to whatever frequency was last in the VFO.
memory mode
.
U C
3
I I I -I.'- L.I
MR/ENT
5 Changing a Memory Frequency
The stored frequency in memory can be changed by
ovenwriting the new figure.
Example: To change the memory frequency of
145.20MHz under Ml to 145.16MHz.
CAUTION:
Pressing Button [FUNC] and [CALL] while turning power on
will reset the radio. After reset, all stored memories will be
relseased and all parameters will be reset to factory default
values.
i_i I I 11 I
I -l.'-i LI
i_i I III
I —I.L LI
dial-frequency mode memory-shift operation
18