Information), Operating – ADI Systems AT-201 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A 3-figured individual and group code are composed of three
DTMF signals.
(information)
@
Operating
[Paging Station]
• Individuai paging
The operating frequency should have been selected prior to
usage.
a)
Program your individual code and a group code.
b)
Program an individual code of the station to be paged. Press
the #/PAGE button while pressing the Function button. Rotate
the channel selector for the code memory address M1 and
set the desired individual code with numeral buttons.
c)
Press the #/PAGE button for the dial-frequency mode. A
word “PAG” will appear on the display.
d)
Press the PTT button. DTMF signals, the destination code
followed by your own code, will be automatically transmitted.
(DTMF signal tone can be heard.)
your own code
X X X *
destination code
43