Information), Procedure ) – ADI Systems AT-201 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

(information)

If you want to cancel the setting in the middle of the

operation, press the */MR /ENT button. The display will return

to the previous frequency.

This is called the dial-frequency mode.

Expanding the receive frequency:

For receiving 130-170 MHz.

( Procedure )

1. Turn power off.

2. Press [3]+[CALL] while turning power back on.

(information)

Returning the receiving range to normal:

CAUTION!

This resets the radio and erases all memories.

Press [FUNC]+[CALL] while turning power back on.

When four numeral buttons are pressed correctly, a long

beep tone will be generated informing you that frequency

setting is complete.