Note, S' b.uu – ADI Systems AT-201 User Manual

Page 35

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

15 Battery-Save Function

16 Frequency Lock

—^[5/SAVE Button]

—^[6/LOCK Button]

This function allows you to reduce the current drain to 1/3

during receiver standby. The receiver will be activated once

every single second.

( Procedure )

Press the 5/SAVE button while pressing the Function button

A “S” will appear on the display to indicate that the

battery-save function is enabled.

Press the 5/SAVE button again while pressing the Function

button to release the battery saver.

; » _ / ( _ /

I I I

I I - l . L f L I

light

I L I

NOTE:

The battery saver is disabled during dual-watch operation

and scanning.

This feature allows you to lock the frequency and operating

mode to prevent improper operation. You can also use this

feature during scanning and dual-watch operation.

( Procedure)

Press the 6/LOCK button while pressing the Function button

A“FL’ will appear on the display to indicate that the frequency

and operating mode is locked.

Press the 6/LOCK button again while pressing the Function

button to unlock them.

. _ _ _

I u I-

I /

!_l '

light

I-----------

■ ~ n» J

frequency locked

remain unchanged

; s' b.Uu

down

disappears