ADI Systems AT-201 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(
3
)
Operation II
a)
Press the D/MSCAN button for memory scan.
b)
Press the D/MSCAN button while pressing the
Function button during memory scanning. The MS.M
scan will start.
during memory scan
, ( / /
t i l l
i I - I . L I L I
m
SC
an
flashing
1
I
►I
~I
'
-/ I
MS.M
scan
C-J Jr i _'.J
flashing
(information)
The MS.M scan and all MS.M scan can be cancelled by
depressing the D/MSCAN button while pressing the Function
button. The memory scan will start.
NOTE:
(1)
“T”
above “M” on the display is an indicator for MS.M
scan.
(2) The MS.M scan is only available when the MS.M scan
frequencies have been programmed.
(3) In memory frequency scan, either the all memory or
MS.M scan can be confined to single memory bank.
(4) There are four banks in 40 channel mode
bankO : MO - M9
bankt : M10 - M19
bank 2 : M20 - M29
banks : M30 - M39
(5) There are two banks in 20 channel mode
bank 0 : MO - M9
bank 1 : MO - M9
27