Receiving station – ADI Systems AT-201 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[Receiving Station]
•Individual paging
The operating frequency should have slelcted prior to usage.
a)
Program your own individual code and a group code.
b)
Press the #/PAGE button for the paging mode. A word “PAG”
will appear on the display.
c)
When the received individual code is identical to the stored
your own code, beep sounds will be generated and a “PAG”
will start flashing to indicate that you have been paged. A
frequency on the display will disappear and be replaced by
an individual code of the paging station, MO CXXX.
d)
Press the PTT button to respond. DTMF signals will be
transmitted in turn.
e)
Press the #/PAGE button and release the paging mode to
communicate.
•Group paging
The operating frequency should have been selected prior to
usage.
a)
Program a group code.
b)
Press the #/PAGE button for the paging mode. A word “PAG”
will appear on the display.
c)
When the received group code is identical to the stored group
code, beep sounds will be generated and a “PAG” will start
flashing to indicate that you have been paged. A frequency
on the display will disappear and be replaced by the group
code. M2 CXXX.
d)
Press the PTT button to respond. DTMF signals will be
transmitted in turn.
e)
Press the #/PAGE button and release the paging mode to
communicate.
disappears-
I U >
1*1 I
I
I
O.C
L I
on
45