Before operation – ADI Systems AT-201 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BEFORE OPERATION
(20) Special Functions with SET Button........................ 37
(21) Pager and Code Squelch.........................................41
(22) Repeater Operation.................................................. 49
(23) Exchange the Transmit and Receive Frequency
during Repeater Operation.....................................
51
(24) Setting a Shift Frequency.........................................52
Troubleshooting...........................................................53
Specification.................................................................54
Warranty Card............................................................. 56
I
Make
sure
that
batteries
are
. inserted .with correct polarity.
2
Do not disassemble and
1
tamper with cores and trim
mers The Transceiver is pro
duced under strict control and
fully adjusted.
r
X,
0 Keep out of high temperature,
humidity and dust.
FT
I Apply 5.0 to 16.0V DC power
k supply only