ADI Systems AT-201 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(2) MS.M scan
This function allows you to scan the specified memory
frequencies only.
0 Setting the memory address number for MS.M scan.
a)
Press the */ MR /ENT button for the memory mode.
b)
Display the desired address number either with numeral
button or the rotary channel selector.
c)
Press the D/MSCAN button while pressing the Function
button “▼’’will be indicated above “M” on the display and
the displayed frequency is programmed for the MS.M
scan.
d)
Repeat the above procedure and program the desired
frequencies for the MS.M scan.
a)
NOTE:
Repeat the above procedure to delete the programmed
frequency for the MS.M scan.“▼” above “M” will disappear.
Operation I.
a)
Set the Transceiver to the dial-frequency mode. Press
the D/MSCAN button while pressing the Function button
will be indicated above “M” on the display and the
Transceiver is now ready for MS.M scan.
b)
Press the D/MSCAN button. The MS.M scan will start.
r
, I_r «_
I f I
/
I I
u
NOTE:
The MS.M scan is only available when the MS.M scan
frequencies have been programmed.
26