ADI Systems AT-201 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

If you are using the battery pack for 6 AA battery, insert
size AA batteries into the battery pack. Be sure that the

batteries are inserted with correct polarity.

NOTE:

Apply the new batteries only.

Attach the battery to the Transceiver. Engage the battery

on the slot of the bottom of the Transceiver and push the

battery case until it latches in the proper position.

■ Turn the power switch on and set the volume control to a

comfortable listening level.

Rotate the squelch control clockwise slowly until the

noise from the speaker stops.

NOTE:

Do not rotate the control clockwise too far. Excessive

squelch reduces the radio sensitivity and may prevent

reception.