11 iswitchina the transmit power [b/pwr/pl button – ADI Systems AT-201 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
11 ISwitchina the Transmit Power
[B/PWR/PL Button]
This is to switch the transmit power. Three power levels are
available for the H/H Transceiver. Select high, moddle or low
power depending on your purpose.
High power (H is displayed)........................................ 5.0W
Middle power (M is displayed)..................................... 2.5W
Low power (L is displayed).......................................... 0.35W
( Procedure)
a)
Press the B/PWR /PL button to switch transmit power. The
“M” on the display will be replaced by “L’ indicating that the
transmit power is switched to low.
b)
Press the B/PWR /PL button again for high power “H" will
be displayed.
c)
Press the B/PWR /PL button again. The middle power will
be returned.
(information)
The Transceiver is initially set to the middle at the factory.
28