Warning, Caution, Notice – Blodgett S1820G User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 4
MAINTENANCE
SECTION 4
MAINTENANCE
WARNING
Before ANY cleaning or servicing of the oven, perform the following procedure:
1.
Switch off the oven and allow It to cool. Do NOT service the oven while it is warm.
2.
Turn the full-flow gas safety valve to the off position.
3.
Turn off the electric supply circuit breaker(s) and disconnect the electric supply to the oven.
4.
If it is necessary to move a gas oven for cleaning or servicing, disconnect the gas supply before moving the oven.
When all cleaning and servicing is compiete:
1.
If the oven was moved for servicing, return the oven to its
original location.
2.
Reconnect the gas supply.
3.
Reconnect the electrical supply.
4.
5.
6
.
Turn on the full-flow gas safety valve. Test the gas line
connections for leaks using approved leak test sub
stances or thick soap suds.
Turn on the electric supply circuit breaker(s).
Perform the normal startup procedure.
WARNING
Possibility of injury from rotating parts and electrical
shock exist in this oven. Turn off and lockout or tagout
electrica! supply to oven{s) before attempting to
disassemble, clean or service oven{s). iJeyer disas
semble or clean the oven with the blower switch or any
other part of the oven turned on.
WARNING
Before performing any maintenance work or cleaning,
turn main power switch off.
CAUTION
When cleaning do not use any abrasive cleaning
materials or water spray, wipe clean only. Never use a
water hose or pressurized steam cleaning equipment
when cleaning this oven.
NOTICE
If the oven is to be removed from its installed location
for servicing, perform the following procedure:
1. Switch off the oven and allow it to cool. Do NOT
service the oven whiie It is warm.
2. Turn off main circuit breakers and disconnect
connector from oven.
3. Move oven to desired location for servicing.
4. When servicing is complete, move oven to original
location.
5. Adjust legs to level oven.
6. Connect electrical connectors to oven.
7. Turn on main circuit breakers.
8. Follow normal startup instructions.
27