SINGER 1050 User Manual

Page 56

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Ladder Seam

The blindstitch ladder seam is particularly appropriate for knit
and stretch fabrics. It is ideal for stretchable construction

seams, and edge finishes for necklines, pockets and collars
in sportswear and swimsuits.

Stitch; blindstitch ^

Stitch width; i J ^ ^ S

Stitch length: 1.5-2.5

General purpose needle plate

General purpose foot or special purpose foot

Make a test sample to adjust stitch width and length and
needle thread tension to suit the fabric. Needle thread

tension should be lighter than normal.

Cut and fit garment, allowing for 1.5 cm (Vs inch) seam
allowance. Baste seam line.
Place fabric under presserfoot so that the straight stitches

fall on the seam line basting and the points toward the
centre of the garment.

After stitching, open seam by pulling fabric back on oppo
site sides of the seam to produce ladder effect. Press seam
allowance after opening.