SINGER 1050 - Manual (Page 21)

the bobbin
Winding the bobbin
The push-button bobbin will make your sewing go faster than
ever before - whether you are using a lot of one kind of thread
or small quantities of different threads.
You will find a bobbin in place under the slide plate of your
machine. To open slide plate, simply pull it gently toward you.
If the bobbin runs out of thread while you are sewing, you can
rewind it without removing it from the machine. The window
in the slide plate lets you see lower thread supply at a glance,
to help avoid running out of thread in the middle of a seam.
..I*-,
№
j
Preparation Steps
1. Use general purpose,
presser foot.
special purpose, or straight stitch
2. Raise presserfoot by raising presserfoot lifter A to release
tension on thread, and raise the needle and take-up lever
to highest position by turning hand wheel
toward you.
(Make sure your needle is larger than a size 9.)
3. Open slide plate and make sure bobbin is empty. For
removal of bobbin and thread, see pages 22 and 23.
B
li ■'3
4. Set machine for straight stitching by pressing button B
under stitch symbol on stitch panel. For additional infor­
mation on pattern selection, see page 24.
20