Winding steps – SINGER 1050 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Winding Steps

We recommend the use of a moderate speed when winding
a bobbin.

1. Move bobbin winding button Ato extreme left.

2, Draw upper thread

away from you

between toes of presser

foot under

left side of presser foot,

then up from the front

and around presser foot screw

Hold end of thread

firmly.

Start machine, run at moderate speed.

.r'x

3. Pull thread end away after a few coils have been wound,
e Watch the bobbin as it fills. Do not allow thread to wind

beyond the outside FULL ring C.

4. Close slide plate to release bobbin winding button tosewing

position.
To start sewing, pull thread back under presser foot and cut.

Place threads diagonally under foot to left side, position
needle in fabric where desired, lower presser foot, and
start machine.