Preparation, Use of reverse stitch, A®asii siragg].# stlfreihimg – SINGER 1050 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(SI‘
2
a®aSii Siragg].# Stlfreihimg
preparation
Select straight stitch.
A red light wiil be seen above the stitch symbol to indicate
that the machine is ready to produce a straight stitch.
Straight stitch needie plate and foot are best for all straight
stitching. The straight stitch foot ailows you to controi the
fabric easily when stitching around a curve or close to the
fabric edge. The design of the foot helps prevent skipped
stitches.
The straight stitch foot is to be used oniy with the straight
stitch needle plate. When you use the straight stitch needle
plate your machine will only sew a straight stitch even if you
touch another pattern symboi by mistake.
Always change back to the appropriate needle plate and
presserfoot when doing sewing other than straight stitching.
Use of Reverse Stitch
If you wish to reinforce the beginning or end of a seam, keep
finger on the reverse stitch button.
Machine will only sew a straight stitch in reverse for as long
as you keep your finger on the button.
25