SINGER 1050 - Manual (Page 25)

ei SeLJImg
selecting a stitch
• Turn machine on.
(Note movement of needle each time power switch is
turned on.)
• When machine is turned on, it will automatically be pro­
grammed to produce a straight stitch as indicated by the
red light which will appear above the straight-stitch
symbol i .
• To select a particular stitch pattern, press pattern selector
button A until the red light B appears above the pair
of stitches in which desired stitch is contained.
Each press of the button advances the indicator light one
pair of patterns to the right.
If necessary, slide pattern group selector C to position
desired stitch under light. Machine is ready to sew desired
pattern when red light appears above it.
The two red patterns at the end of the panel represent the
buttonhole. For additional information on buttonhole, see
page 66.
Press straight-stitch selector button D if you want to return
to straight stitching after pattern stitching.
For reverse stitching, press and hold in reverse stitch
selector button E while sewing.
Note; The machine will only reverse in straight stitch.
B
o o o o o ^
'i it
-i
il! 11
■J
!♦
4
^
4' 5‘ 6‘ 7 5" 6*
Group 1
1 Arrowhead
2 Scallop
3 Domino Stitch
4 Honeycomb
5 Feather
6 Ric-Rac
7 left Side of Buttonhole
Group 2
1 Plain Zig-Zag
2 Elastic Stretch
3 Multi-Stitch Zig-Zag
4 Blindstitch
5 Straight-Stretch Stitch
6 Overedge Stretch
7 Right Side of Buttonhole
Flexi-Stitch • Patterns Straight-Stretch Stitch
24