USL JSD-100 Manual User Manual

Page 11

Analog Audio Outputs – Accessibility
 Hearing Impaired – User selectable input channel or LCR mix.  300mV mono balanced.
 Visual Narration – User selectable input channel (8 or 16).  300 mV mono balanced.

Eight Channel Analog Audio Output (JSD‐100x)
 Eight Channels Balanced 300mV adjustable (L, C, R, Ls, Rs, LFE, Lc/Lrs, Rc/Rrs).

Sixteen Channel Analog Audio Output (JSD‐100xA)
 Sixteen Channels Balanced 300mV adjustable. Configurable as 5.1, 7.1 broadband, biamp three or five screen

channels, triamp three screen channels or 13.1

Thirty‐two Channel AES Output (JSD‐100xD)
 Thirty‐two audio channels on 16 AES pairs. Configurable as 5.1, 7.1, or 13.1 broadband, biamp or triamp five

screen channels.

Communication Ports
 DB25F pulse automation.
 Serial control – RS‐232.
 USB for laptop setup.
 Ethernet 10/100 ‐ RJ45.

Front Panel Interface
 Eleven buttons: COAX1, COAX2, TOSLINK, DIGITAL 16 CH, USER 1, USER 2, ANALOG 8 CH, NON/SYNC, AUX,

MIC, and MUTE.

 Main Fader – 0‐10 used for main audio and bypass audio.
 Front panel displays fader level and selected format. Bar graphs display output levels.
 USB connector.
 Power switch and power supply status LEDs.  Turning power off activates bypass mode.

Format Selection
 Digital (COAX1, COAX2, TOSLINK, 8 to 16 Channel AES‐EBU).
 Analog (8 channel, Non‐Sync, Auxiliary, Microphone).
 User 1, User 2 (Configurable in software, e.g., digital 16 channel at lower level, 7.1, 13.1, etc.).

Rear Panel Connectors – Main Chassis
 PA Microphone – XLR / ¼” phone jack.
 Calibration Microphone – 3.5mm stereo jack.
 Eight Channel Analog – DB25F.
 Non/Sync – two RCA jacks.
 AUX – two RCA jacks.
 Hearing Impaired and Visual Narration – pluggable Phoenix connector.
 COAX1 and COAX2 – RCA Jacks with transformer input
 TOSLINK – Optical.
 16 Channel Digital AES‐EBU – DB25 and Dual RJ45.
 Removable Memory Card – SD compatible.
 Serial Control – RS‐232 on DE9F.
 Pulse Automation – DB25F.
 10/100M Ethernet – RJ45.
 DC 12V Power Connector – 5mm with 2.5mm pin.
 AC Power – IEC socket.  100‐240VAC, 50/60Hz, 18W typical, 7.5W sleep.