TeeJet IC18 SPRAYER JOB COMPUTER - Manual (Page 53)

47
98-05204 R1 US
ISOBUS Job Computer : IC18 Sprayer
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
Section or Icon Description
Boom Sections Displays the active and inactive boom sections as well as if
they are on (spray is blue) or off (spray is gray).
NOTE: The color on the boom sections indicates
the color of the selected nozzle type.
Circulation
SC CC
If Circulation is installed and selected in the OEM Menu, “SC” (Semi Circulation) or
“CC” (Full Circulation) will be displayed.
NH3 Mode Active
NH3
Displays if the unit is in NH3 mode.
Sprayer ID Number Displays the soft key number assigned to the displayed IC18 ECU.
Nozzle Information This information section displays the nozzle type,
recommended pressure range, current working
pressure and high pressure limit.
2 8
p s i
Nozzle Type Displays the selected nozzle type
Recommended
Pressure Range
Displays the recommended pressure range for the selected
nozzle (the green area indicates the pressure range). The
pressure range will change depending upon the selected
nozzle, working speed, etc.
IMPORTANT! ALWAYS REFER TO THE RECOMMENDED PRESSURE RANGE
AS FAILURE TO DO SO MAY RESULT IN UNEVEN SPRAY PATTERNS.
Current Working
Pressure
Displays the current working pressure
NOTE: This pressure range should not exceed
the recommended pressure range.
IMPORTANT! ALWAYS REFER TO THE RECOMMENDED NOZZLE PRESSURE
VALUES WHEN SETTING NOZZLE PRESSURE.
Current Pressure
Rate
Displays the current pressure to the nozzle
2 8
p s i