TeeJet IC18 SPRAYER JOB COMPUTER - Manual (Page 28)

22
www.teejet.com
ISOBUS Job Computer : IC18 Sprayer
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
JOB PARAMETERS
Job Parameters configures application settings. Options include Active Trip Counter, Preset Application Rates and
Nozzle.
MAIN SETUP MODE MENU STRUCTURE
| | | | | |
Counters Job Parameters Machine User Interface Communication Help
Figure 3-12: Job Parameters
1. From the Main Setup Screen , select JOB
PARAMETERS.
NOTE: Settings are NOT automatically saved when
selected. The ACCEPT KEY must be selected
to save the setting. Select the ESCAPE KEY
to escape without saving settings and return to the
previous menu.
Active Trip Counter
Active Trip Counter selects one of up to ten (10) active trip
counters to view the desired trip information. The trip that
is “active” is displayed/active on the Operation Screen.
• To select the Active Trip Counter, use the number
pad or slide bar.
NOTE: The selected trip counter will have all data modified (added too) when additional operations are activated.
If current trip counter is not cleared, the new data will be added to the existing data.
Preset Application Rates
Preset Application Rates define up to five (5) target rates of product being applied per hectare/acre. These
settings will set the same for all active trips. Target rates set to "0.0" will not be in included in the TOGGLE
PRESET TARGET RATE options on the Operation Screen or Home Screen.
• To select the Application Rate, use the number pad or slide bar.
Nozzle
Nozzle selects the nozzle type. This setting will set the same for all active trips. The five (5) available nozzle types
are preset under Main --> Machine --> Implement Parameters --> Nozzle Preset Setup.
• To select the Nozzle type, select an option from the drop down menu or use the UP/DOWN ARROWS to
highlight the option.