TeeJet IC18 SPRAYER JOB COMPUTER - Manual (Page 37)

31
98-05204 R1 US
ISOBUS Job Computer : IC18 Sprayer
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
Calibrations
Figure 3-24: Calibrations
Figure 3-25: Implement Speed Sensor
Calibrations establishes either manual or automatic
settings of the sensors.
NOTE: For specific calibration options to appear, a
specific sensor needs to be installed. Sensor
availability is activated on the Sensor Presence
screen in the OEM section.
Implement Speed Sensor
The Implement Speed Sensor establishes the wheel
pulses over a specified distance. This value can be
established manually or calibrated automatically.
Manual Calibration
Manual calibration establishes the pulses based on a user
entered value.
• To select the Pulses per Distance, use the number
pad or slide bar.
Automatic Calibration
Automatic calibration establishes the pulses using the
automatic calibration function.
• To calibrate the pulses per distance, select
CALIBRATION KEY .
• Follow the series of instructions displayed.
• Select the ACCEPT KEY to complete the
calibration
The counted wheel pulses will be displayed during the
automatic calibration.