TeeJet IC18 SPRAYER JOB COMPUTER - Manual (Page 40)

34
www.teejet.com
ISOBUS Job Computer : IC18 Sprayer
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
OEM
The OEM setup menu is password protected and the settings in this menu are directly related to the fitted OEM
equipment. To obtain an access code, contact your local dealer or TeeJet Technologies Customer Service.
To access the OEM screens:
Figure 3-28: Machine to OEM
Figure 3-29: OEM Unlock
1. From the Main Setup Screen , select MACHINE.
2. Select OEM.
3. Select the Access Code Entry Box to the right of the
menu option.
4. Use the number pad or slide bar to enter the access
code.
5. Select the ACCEPT KEY to complete the unlock
process
6. Select from:
►Sensor presence – used to establish sensors for
Flow, Liquid Pressure, Fill Flow and the Tank
►Implement parameters – used to establish the
Sprayer Mode, Number of Sections and Circulation
►Valve setup – used to establish the Regulation
Valve Type, Section Valve Behavior and Section
Valve Type
►Tank setup – used to establish maximum and
minimum tank content, Auto Filling mode and Auto
Filling Offset value
►Regulation details – used to adjust the control of
the regulation valve
►Clear total counters – used to delete the Total
Count system counter for Area, Volume and Time
back to the default settings
NOTE: Settings are NOT automatically saved when
selected. The ACCEPT KEY must be selected
to save the setting. Select the ESCAPE KEY
to escape without saving settings and return to the
previous menu. OEM