TeeJet IC18 SPRAYER JOB COMPUTER - Manual (Page 42)

36
www.teejet.com
ISOBUS Job Computer : IC18 Sprayer
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
• To set the BoomPilot ECU pairing, select an option from the drop down menu or use the UP/DOWN
ARROWS to highlight the option.
Currently Paired With Information
Displays the current ECU ID numbers for a paired switchbox or BoomPilot ECU.
• If no switchbox or BoomPilot ECU is on the system, "none" will be shown.
• If a specific switchbox or BoomPilot ECU has been chosen to be paired with and it is not available on the
system, "none" will be shown.
Figure 3-31: Sprayer Number
Show Number on Soft Key
Show Number on Soft Key establishes if a user assigned
identification number will be visible on the Master Screen,
Home Screen and Operation Screen.
• To set the Soft Key Number mode, select an option
from the drop down menu or use the UP/DOWN
ARROWS to highlight the option.
NOTE: Typically used only if more than one (1) IC18 ECU
is on the CAN bus.
If “Yes” is selected, a Sprayer Number (FI) option
appears.
Sprayer Number (FI)
Sprayer Number is the identification number referring
specifically to the IC18 ECU referenced under the "This
IC18" information row on the User Interface screen.
• To set the Sprayer Number, use the number pad or
slide bar.