TeeJet IC18 SPRAYER JOB COMPUTER - Manual (Page 33)

27
98-05204 R1 US
ISOBUS Job Computer : IC18 Sprayer
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
Nozzle Preset Setup
Figure 3-19: Nozzle Preset Setup
Nozzle Preset Setup establishes up to five (5) sets of
nozzle options setting the nozzle type, size, low/high
pressure limit, reference flow and reference pressure.
Nozzle Preset
Each one of up to five (5) Nozzle Presets can be selected
to establish different sets of nozzle options.
• To select the Nozzle Preset set, use the number pad
or slide bar.
Nozzle Type
Nozzle Type sets whether the nozzle’s size will be
selected from a general section of established tips or a
optional user tip.
• To select the Nozzle Type, select an option from the drop down menu or use the UP/DOWN ARROWS to
highlight the option.
Nozzle Size
Nozzle Size sets the nozzle from a list of established sizes (see chart below) or from a optional user tip.
• To select the Nozzle Size, select an option from the drop down menu or use the UP/DOWN ARROWS to
highlight the option.
Established Nozzle Sizes and Colors
Size
Color Size Color
01 Orange 05 Brown
015 Green 06 Grey
02 Yellow 08 White
025 Purple 10 Light Blue
03 Blue 15 Light Green
04 Red 20 Black
Figure 3-20: Nozzle Size on the Operating Screen
When “General” nozzle type is selected and a establised
nozzle size is selected, the Low Pressure Limit, High
Pressure Limit, Reference Flow and Reference Pressure
fields will be automatically set with the standard settings
for the specific nozzle chosen. These setting can be
manually adjusted.