StarTech.com SV1107IPEXT - Manual (Page 40)

Instruction Manual 36
From the remote computer click on the Virtual Media icon in the Windows Client Control Panel,
this opens the Virtual Media Connection dialog box:
Please Note: More than one USB mass storage device may be connected and recognized, but
only the unit selected can be accessed.
1. Drop down the Physical Device list to select the appropriate drive.
2. After you have made your media source selection, click Connect [the Connect button
changes to Disconnect]. Open “My Computer” on the remote computer and the selected
device will appear as a connected drive, files may, then be transferred between the drive and
local computer.
3. To end the connection, bring up the dialog box and click Disconnect.
*Please Note: the connection remains open until the disconnect button is pressed.
The Java Applet
The Java Applet makes the SV1107IPEXT accessible to all supported platforms that have Java 2
installed. Java 2 is available for free download from Sun’s Java web site (http://java.sun.com).
Note: To verify your configuration and to become familiar with using the applet, the first step is
to access the SV1107IPEXT from your local network, once your configuration has been proven,
the Internet connection will be covered.
To connect from your local network:
1. Ensure the “remote” computer is connected to your network.
2. Ensure the SV1107IPEXT is connected to your local network and to the local computer
3. Start the browser of your choice on the remote computer.
4. Type in http://192.168.1.60, and hit the enter key.