Carrier Access Access Bank II SNMP - Manual (Page 172)

Command Line Interface (CLI)
9/24/01 14-27
event and alarm logs.
14.4.4.28 trap
Use the trap command to send a warm start trap to SNMP, or to send a link up or down trap to an
interface.
14.4.4.29 snmp
Use the snmp command to set and display SNMP System Group settings for RFC-1213.
Operations Type Comments
To configure the clock for
the time time 08:04:00
To display date & time date
Operations Type Comments
To send a warm start trap
to SNMP trap
To send a link up trap to
an interface trap n up n is the interface number (1 or 2)
To send a link down trap
to an interface trap n down
Operations Type Comments
To set the system contact
string to your name snmp contact "John Doe" Sets system contact name to John Doe.
To set the location
identifier snmp location " CAC :
5395 Pearl Parkway,
Boulder CO 80301” Sets system locations
To set the node name
identifier snmp name “Access
Bank ”
To display Help snmp