Carrier Access Access Bank II SNMP - Manual (Page 169)

14-24 9/24/01
14.4.4.16 kill
Use the kill command to remove time slot connections. This command is used to kill static connec-
tions and group definitions.
14.4.4.17 loop
Use the loop command to display, disable and enable loopbacks.
14.4.4.18 mac
Use the mac command to display the six-byte MAC address in hexadecimal.
14.4.4.19 make
Use the make command to configure static connections and group definitions.
Operations Type Comments
To remove a bypass
connection on T1 #1 kill bypass d1:24 Kills the connection for slot 24 on T1
#1
To display command
Help kill ?
Operations Type Comments
To set a line loopback
towards the network on
ds1 1 loop d1 network line Puts T1 #1 in network line loopback.
To verify loopback status loop
To display Help loop ?