8 craft -21, 9 date -21 – Carrier Access Access Bank II SNMP User Manual
Page 166
![background image](/manuals/71119/166/background.png)
Command Line Interface (CLI)
9/24/01
14-21
14.4.4.8 craft
Use the craft command to set and display all options of the craft port. This command allows the user
to customize the craft (management) interface for communication parameters and for remote and dia-
lout access.
14.4.4.9 date
Use the date command to set date in the format shown: This date is used for time stamping alarms
and events in the system.
Operations
Type
Comments
To display all
connections
connections
Displays all connections and group
definitions.
To display bypass
connections
connections bypass
Displays only bypass connections
between spans. A Bypass connection
is a nailed up configuration and
doesn’t utilize the switch state logic.
Operations
Type
Comments
To set the baud rate to
9.6
craft baud b9600
Sets the Baud rate to 9.6 KBps
To set bit data size 7 bit
data
craft data bit7
Sets the data size to 7 bits
To set parity to even
craft parity even
Sets the parity to Even
To display Help
craft ?
Operations
Type
Comments
To
configure the clock for
the current date
date 10:13:97