Conair 100 User Manual
Page 92
6 - 2 6
l Tr o u b l e s h o o t i n g
R e f i l l i n g t h e D e s i c c a n t Ta n k s
When desiccant becomes clogged or contaminated, you should replace the des-
iccant in all three tanks to ensure optimum performance.
1
Remove the desiccant tank from the carousel.
See “Replacing Desiccant Tanks.”
2
Remove the the tank end plate.
Remove the six 10-32 self-tapping screws from the end plate.
3
Remove the screen cap.
Remove the two 1/4-20 nuts from the center post and pull the screen cap out.
4
Remove the old desiccant.
5
Replace the gasket on the flange, if necessary.
6
Fill the tank with fresh desiccant.
Fill the tank with the weight of desiccant indicated in the following table.
Model
Desiccant Weight
15 & 25
1 lb. (0.37 kg)
50
2 lb. (0.75 kg)
75
3 lb. (1.12 kg)
100
4 lb. (1.49 kg)
(continued)