Conair 100 - Manual (Page 109)

A p p e n d i x l E - 4
5 Remove the precooler assembly from the precooler housing.
6 Clean the precooler assembly using a mild soap and water. Let the precooler
dry thoroughly before installation.
CAUTION: During the cleaning process, DO NOT cut or remove the stainless steel
wire that holds the precooler assembly together.
7 Inspect the condition of the gasket. If the gasket is damaged, replace the
gasket.
8 Reassemble by repeating the steps in reverse order.
C l e a n i n g t h e P r e c o o l e r
( c o n t i n u e d )