Press the vcr button, then press the menu button, Press the exit/status button, Press the play a button to start tape playback – Philips VRA456AT User Manual
Page 43: Stereo, Hi-fi, Helpful hints
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hi-Fi
Stereo
Tape Playback (VRA656 only) 45
If a tape is recorded in Hi-Fi stereo, follow the steps below to play
the tape in Hi-Fi stereo.
Press the VCR button, then press the MENU button.
^SELECT A
T
CHOOSE >/OK
VCR SET UP
TUNER SET UP
INITIAL SET UP
V TO END PUSH EXIT
2
Press the PLAY ▲ or STOP ▼ button to select VCR SET
UP, then press the FF ►/OK button.
^SELECT
À T
CHOOSE WOK
^ ON SCREEN MODE
ON
BLUE BACKGROUND
ON
TIMER REC SPEED
MANUAL
VIDEO STABILIZER
OFF
AUDIO OUT
HIFI
STEREO/SAP
STEREO
vTO END PUSH EXIT
Press the PLAY
A
or STOP ▼ button to select AUDIO
OUT, then press the FF ►/OK button so that HIFI appears
beside AUDIO OUT.
Press the EXIT/STATUS button.
5
Press the PLAY
A
button to start tape playback.
Helpful Hints
During playback, Hi-Fi stereo may
temporarily revert to normal audio
when you adjust tracking.This is nor
mal.
If Hi-Fi stereo continually reverts to
normal audio during playback, you
may want to press the FF ^/OK
button to select MONO at step 3.
Only tapes recorded in Hi-Fi stereo
will play in Hi-Fi stereo. Tapes
recorded in normal audio will play in
normal audio.
You may also select HIFI or MONO
by pressing the VCR button, then
repeatedly pressing the
AUDIO/MUTE button on the remote
control.