Press the vcr button, then press the menu button, Press the exit/status button, Setting the clock (confd) 1 – Philips VRA456AT User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Clock (confd) 1
7
Automatic PBS Channel Selection
>rc
2
Press the VCR button, then press the MENU button.
Press the PLAY
A
or STOP
T
button to select INITIAL
SET UP, then press the FF ►/OK button.
3
Press the PLAY
A
or STOP ▼ button to select CLOCK,
then press the FF ►/OK button. (If AUTO CLOCK is set to
OFF, PBS CH. will not be available in the menu. If this happens,
press the FF ►/OK button to select AUTO CLOCK, then press
the PLAY
A
or STOP
T
button to set AUTO CLOCK to ON.)
TIME
DATE
01/01/99
AUTO CLOCK ON
PBS CH.
AUTO
D.S.T
AUTO
TIME ZONE AUTO
TO SET PUSH
AT
THEN >/OK
TO END PUSH EXIT
4
Press the FF ►/OK button repeatedly to select PBS CH.
Press the PLAY
A
or STOP ▼ button repeatedly so that
AUTO flashes beside PBS CH.
6
Pres
7
Press the EXIT/STATUS button.
An on-screen message will ask you to turn off the VCR.
Press the POWER button to turn off the VCR.
Auto will flash in the display panel until the clock is set. Leave the
VCR power off until the clock is set. If — : — appears on the
display panel after you turn off the VCR, the VCR could not find
the time. Use a different method to set the clock.
Helpful Hints
To display the time on the display
panel, press the EXIT/STATUS but
ton repeatedly.
If you live near the boundary of an
adjacent time zone, your PBS chan
nel may come from a different time
zone. Use Time Zone Selection to
set your clock. Details are on page
15.