Philips VRA456AT - Manual (Page 42)

44 Multi-Channel Television Sound System (YRA656 only) (confd)
To receive and record programs broadcast in second audio, follow steps I-6. To receive and record a pro­
gram broadcast in stereo, make one of the connections shown, then follow steps I -6.
1=1 n D |-|0
If you have a Stereo and a Monitor TV,
use a video cable to connect the VCR’s
VIDEO OUT Jack to the TV’s VIDEO IN
Jack. Use audio cables to connect the
VCR’s AUDIO OUT Jacks to the
Stereo’s AUDIO IN Jacks.
I- O
IIDDDDdnODDir
s n
liiii
IVIDEOt- ^
1
^
1 'lii
CH3 CH4 '( 0 ) ^ |im 1 -------------
©
Press the VCR button, then press the MENU button.
©SELECT A V CHOOSE WOK
VCR SET UP
TUNER SET UP
INITIAL SET UP
.TO END PUSH EXIT
Press the PLAY ▲ or STOP ▼ button to select VCR SET
UP, then press the FF ►/OK button.
©SELECT A T CHOOSE WOK
ON SCREEN MODE ON
BLUE BACKGROUND ON
TIMER REC SPEED MANUAL
VIDEO STABILIZER OFF
AUDIO OUT HIFI
STEREO/SAP STEREO
Wo END PUSH EXIT
3
Press the PLAY A or STOP V button to select
STEREO/SAP, then press the FF ►/OK button to select
SAP (for a Second Audio Program) or STEREO, whichev-
enyou prefer.
4
Prei Press the EXIT/STATUS button.
Use the CH(annel) A/T button to select a channel to
record.
Press the EXIT/STATUS button to access the on-screen status dis­
play and to make sure the program is being broadcast in stereo or
second audio.
6
Press the REC(ord)/OTR button to start recording.
-OR, if you have a single-speaker TV,
use an RF coaxial cable to connect
the VCR’s RF OUT Jack to the TV’s
ANTENNA IN Jack.
Helpful Hints
If you want to connect the VCR to a
Stereo TV, follow these steps.
1) Connect the antenna or cable sig­
nal to the VCR's ANT(enna) IN Jack.
2) Use stereo audio cables to con­
nect the VCR's AUDIO OUT Jacks to
the TV's AUDIO IN Jacks.
3) Use a video cable to connect the
VCR's VIDEO OUT Jack to the TV's
VIDEO IN Jack.
Make sure the TV and the Stereo (if
applicable) are in Line Input or
Auxiliary mode. Please refer to your
TV or Stereo owner's manual for
details.