Philips VRA456AT - Manual (Page 38)

7
.................................................... •...................................................................................
Press the Number 3/DATE+ or Number 6/DATE- button
to set the recording date. Every time you press a button, the
date changes in one-day increments. If you press and hold a but­
ton, the date changes quickly.The day of the week will appear
automatically. (You cannot program the VCR to record more than
one year in advance.)
38 Quick Programming
fcont'd)
'^ONETIME PROGRAM
PROGRAM I
CHANNEL+/- 12
START+/- 08:00 PM
STOP+/- 10:00 PM
REC SPEED SLP
DATE+/- 07/31/99
SATURDAY
SET DAILY=8 ORWEEKLY=9
TO END PUSH EXIT
8
If you want to record the program one time only, go to
step 9. You may also press the Number 8/DAILY or
Number 9A/VEEKLY button repeatedly to select a ONETIME
PROGRAM.
If you want to record the program daily, press the
Number 8/DAILY button so that DAILY PROGRAM
appears at the top of the screen. The VCR will record a
program every day from Monday through Friday, starting at the
same time and recording for the same length of time.
If you want to record the program every week, press the
Number 9/WEEKLY button so that WEEKLY PRO­
GRAM appears at the top of the screen. The VCR will
record a program on the same day at the same time and for the
same length of time every week.
^AILY PROGRAM (MON-FRI) ^
PROGRAM I
CHANNEL+/- 12
START+/-
08:00 PM
STOP+/- 10:00 PM
REC SPEED SLP
DATE+/- 07/31/99
SATURDAY
SET DAILY=8 ORWEEKLY=9
TO END PUSH EXIT
9
Press the EXIT/STATUS button. PROGRAM WAS COM-
PLETED/PLEASETURN OFF VCR FOR TIMER RECORDING will
appear on the screen. If PROGRAM NOT COMPLETED appears,
try again from step I.
1 0
Press the POWER button to turn off the VCR. The © light
will appear on the display panel. (The © light and the Cassette-
Inside light will flash when you turn off the VCR if there is not a
tape in the VCR.) The VCR must be turned off for a timer
recording to take place. Leave the Cable Box/DBS on, if
applicable.
Helpful Hints
If you leave the VCR on past the
scheduled start time of a timer
recording, you will not be asked again
to turn off the VCR.The VCR might
store the recording for the same time
and day in the next year. Or, the VCR
may start recording when you turn
off the VCR power.
If the end of the tape is reached dur­
ing a timer recording, recording will
stop. The VCR will eject the tape, then
turn itself off
If PROGRAM NOT COMPLETED/
CLASH appears at step 9, the timer
recording you just programmed over­
laps another timer recording. The
timer recording you just programmed
will not take place.The timer record­
ing menu will reappear. To cancel a
timer recording, see page 39.
If you forget to turn off the VCR,
PLEASE TURN OFF VCR FOR TIMER
RECORDING flashes on your TV
screen two minutes before a timer
recording starts. To remove the mes­
sage, press the CLEAR button.