Philips VRA456AT - Manual (Page 35)

Timer Recording with the VCR Pius+ Programming System (confd) 35
5
Press the FF ►/OK button. If the VCR PLUS+ and CABLE/TV
channel lists appear on the screen, the CABLE/TV channel has not
been set for the VCR PLUS+ channel of the program you have set
in step 4. Press the Number buttons to enter the CABLE/TV
channel number from your list on page 32, then press the
FF ►/OK button.
6
If you want to record the program one time only, go to
step 7. You also may press the Number 8/DAILY or
Number 9/WEEKLY button repeatedly to select a ONETIME
PROGRAM.
If you want to record the program daily, press the
Number 8/DAILY button so that DAILY PROGRAM
appears at the top of the screen. The VCR will record a
program every day from Monday through Friday, starting at the
same time and recording for the same length of time.
If you want to record the program every week, press the
Number 9A/VEEKLY button so that WEEKLY PRO­
GRAM appears at the top of the screen. The VCR will
record a program on the same day, at the same time, for the
same length of time every week.
^AILY PROGRAM (MON-FRI) ^
PROGRAM I
CHANNEL+/- 12
START+/- 08:00 PM
STOP+/- 10:00 PM
REC SPEED SLP
DATE+/- 07/31/99
SATURDAY
SET DAILY=8 ORWEEKLY=9
TO END PUSH EXIT
7
Press the SPEED button to select the tape speed. The
selected tape speed, SP or SLP, will appear beside REC SPEED.
8
Press the EXIT/STATUS button. PROGRAM WAS COM-
PLETED/PLEASETURN OFFVCR FORTIMER RECORDING
should appear on the screen. (If PROGRAM NOT COMPLETED
appears, begin again from step I.) After five seconds, the on-screen
display will disappear.
9
Press the POWER button to turn off the VCR.The VCR
must be turned off for a timer recording to take place.
The © light will appear on the display panel.The 0 light and the
Cassette-Inside light will flash when you turn off the VCR if there
is not a tape in the VCR.
Turn off the VCR for a timer recording! Put a tape
in the VCR. Leave the Cable Box/DBS on.
Q*CZ)Q
START ¡ STOP ; DATE
DBS DAILY ■ WEEKLY
Helpful Hints
Do not select DAILY at step 6 if the
VCR Plus+ recording you chose is on
a Saturday or Sunday. The recording
will not occur, even though the VCR
may accept the way you pro­
grammed the recording.
To exit the VCR Plus+ programming
system at any step, press the
EXIT/STATUS button.
PROGRAM NOT COMPLETED/
CLASH may appear on the screen
for five seconds at step 8 if the
timer recording you programmed
overlaps another timer recording.To
cancel the overlapping timer record­
ing, follow the steps on page 39.
If you want to check your timer
recordings, follow the steps on page
39.