Philips VRA456AT - Manual (Page 37)

Quick Programming
(cont’d)
37
4
Press the Number I/START + or Number 4/START- but­
ton to set the recording’s start time. Every time you press a
button, the start time changes in one-minute increments. If you
press and hold a button, the start time changes in 30-minute incre­
ments.
^ONETIME PROGRAM
PROGRAM I
CHANNEL+/- 12
START +/-
08 :00 PM
STOP+/- --:--AM
REC SPEED SLP
DATE +/-
SET DAILY=8 ORWEEKLY=9
TO END PUSH EXIT
5
Press the Number 2/STOP+ or Number 5/STOP- button
to set the recording’s stop time. Every time you press a but­
ton, the stop time changes in one-minute increments. If you press
and hold a button, the stop time changes in 30-minute increments.
^ONETIME PROGRAM
PROGRAM I
CHANNEL+/- 12
START +/- 08 :00
STOP+/- 10:00
REC SPEED SLP
DATE +/-
PM
PM
SET DAILY=8 ORWEEKLY=9
TO END PUSH EXIT
6
Press the SPEED button to select the tape speed (SP or
SLP). Details about tape speed are given below.
^ONETIME PROGRAM
PROGRAM
CHANNEL +/-
START +/-
STOP +/-
REC SPEED
DATE +/- I
12
08:00 PM
10:00 PM
SLP
SET DAILY=8 ORWEEKLY=9
TO END PUSH EXIT
Instructions continue on page 38.
Tape Speeds
This chart shows the recording/playback time for
TI60,TI20, andT60 video cassettes.There are
three playback speeds: SP, LP, and SLP.This VCR
will play tapes recorded in LP, but LP will not
appear on the display panel.This VCR will record
only in SP and SLR
Tape Speed
Cassette type / Playback Time
TI60 TI20 T60
SP (standard play) 2 hrs.
40 mins.
2 hrs. 1 hr.
LP (long play)
(playback only)
5 hrs.
20 mins.
4 hrs. 2 hrs.
SLP (super long play)
8 hrs. 6 hrs. 3 hrs.