Philips VRA456AT - Manual (Page 18)

18 DaylighuSavìngsTime
Follow the steps below to program the VCR so its clock will auto­
matically move forward one hour in April and turn back one hour
in October.
I
Press the VCR button, then press the MENU button.
Press the PLAY A or STOP ▼ button to select INITIAL
SET UP, then press the FF ►/OK button.
^SELECT A V CHOOSE >/OK
CLOCK
LANGUAGE
VCR PLUS+ CH.
V TO END PUSH EXIT
ENGLISH
Press the PLAY A or STOP V button to select CLOCK,
then press the FF ►/OK button. (If AUTO CLOCK is set to
OFF, PBS CH. and TIME ZONE will not appear In the menu.)
TIME 10:45AM
DATE 01/01/99
FRIDAY
AUTO CLOCK ON
PBS CH. AUTO
D.S.T AUTO
TIME ZONE AUTO
TO SET PUSH AT THEN >/OK
TO END PUSH EXIT
Press the FF ►/OK button repeatedly to select D.S.T.
Press the PLAY A or STOP V button so that ON, OFF, or
AUTO appears beside D.S.T.
Select ON to make the clock adjust itself according to the VCR’s
calendar. Select OFF to turn off the feature. Select AUTO to make
the clock adjust itself according to the signal it receives from the
PBS channel. If AUTO CLOCK is set to OFF, you may only set
D.S.T. to ON or OFF.
6
Pres
7
Press the EXIT/STATUS button.
An on-screen message may ask you to turn off the VCR.
Press the POWER button to turn off the VCR. Auto will
flash in the display panel until the clock is set. Leave the VCR
power off until the clock is set. If - - : — appears on the display
panel after you turn off the VCR, the VCR could not find the time.
Use a different method to set the clock.