Philips VRA456AT - Manual (Page 13)

Setting the Clock 13
There are four ways to set the VCR’s clock: Manually, with Time
Zone Selection, with Manual PBS Channel Selection, or with
Automatic PBS Channel Selection, Cable Box/DBS users must set
the clock manually. Before you set the clock, make sure:
® The VCR power is on.
® The VCR light appears on the display panel. If It does not, press
theVCR/TV button once.
^ Channels are set up.
® You make each entry within one minute of the previous entry.
To set the clock manually, follow the steps on pages 13-14.To use
Time Zone Selection, go to page 15.To use Manual PBS Channel
Selection, go to page l6.To use Automatic PBS Channel Selection,
go to page 17.
Manual Clock Setting
I
Press the VCR button, then press the MENU button.
^SELECT ▲ T CHOOSE >/OK
VCR SET UP
TUNER SET UP
INITIAL SET UP
.TO END PUSH EXIT
2
Press the PLAY A or STOP V button to select INITIAL
SET UP, then press the FF ►/OK button.
^SELECT A V CHOOSE >/OK
CLOCK
LANGUAGE
VCR PLUS+ CH.
.TO END PUSH EXIT
3
Press the PLAY A or STOP ▼ button to select CLOCK,
then press the FF ►/OK button.
TIME
DATE
AM
01/01/99
AUTO CLOCK ON
PBS CH. AUTO
D.S.T. AUTO
TIME ZONE AUTO
TO SET PUSH AVTHEN >/OK
TO END PUSH EXIT
Instructions continue on page 14.
Helpful Hints
To program the VCR so its clock
will automatically move forward one
hour in April and turn back one
hour in October, see page 18.
To make corrections, follow steps
1-3, then press the FF ^ ¡OK button
until the item you want to correct is
flashing. Press the PLAY A or
STOP V button to enter the correct
information. Press the EXIT/STATUS
button.