Philips VRA456AT - Manual (Page 40)

40 Timer Recording Speed Setting
If a program is recording in SP and there is not enough tape to
record the entire program, the VCR automatically switches to SLP
to allow complete recording if TIMER REC SPEED is set to AUTO.
This feature is especially useful when you set a timer recording for
a program that is more than two hours long.
For example, when you record a program of 140 minutes in length
onto a 120-minute tape, the program is recorded in SP for about
110 minutes and in SLP for about 30 minutes.
Approximately I 10 minutes Approximately 30 minutes
SP SLP
Follow the steps below to set TIMER REC SPEED to AUTO.
I
Press the VCR button, then press the MENU button.
^SELECT ▲ T CHOOSE WOK
VCR SET UP
TUNER SET UP
INITIAL SET UP
V TO END PUSH EXIT
2
Press the PLAY A or STOP ▼ button to select VCR SET
UP, then press the FF ►/OK button.
^SELECT ▲ ▼ CHOOSE WOK
ON SCREEN MODE ON
BLUE BACKGROUND ON
TIMER REC SPEED MANUAL
VIDEO STABILIZER OFF
AUDIO OUT HIFI
STEREO/SAP STEREO
Wo END PUSH EXIT
3
Press the PLAY ▲ or STOP V button to select TIMER
REC SPEED, then press the FF ►/OK button so that
AUTO appears beside TIMER REC SPEED. (To turn off this
feature, press the FF ►/OK button so that MANUAL appears
beside TIMER REC SPEED.)
^SELECT A ▼ CHOOSE WOK
ON SCREEN MODE ON
BLUE BACKGROUND ON
TIMER REC SPEED AUTO
VIDEO STABILIZER OFF
AUDIO OUT HIFI
STEREO/SAP STEREO
Wo END PUSH EXIT
4
Press the EXIT/STATUS button.
Helpful Hints
Some distortion may appear on the
tape when the tape speed changes.
AUDIO OUT and STEREO/SAP will
not appear in the VCR SET UP
menu if you have theVRA456.