Press the ff ►/ok button to select pbs ch – Philips VRA456AT User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
16 Setting the Clock (confd)
Manual PBS Channel Selection
1
Press the VCR button, then press the MENU button.
2
Press the PLAY
A
or STOP
V
button to select INITIAL
SET UP, then press the FF ►/OK button.
3
Press the PLAY ▲ or STOP ▼ button to select CLOCK,
then press the FF ►/OK button. (If AUTO CLOCK is set to
OFF, PBS CH. will not be available in the menu. If this happens,
press the FF ►/OK button to select AUTO CLOCK, then press
the PLAY
A
or STOP
V
button to set AUTO CLOCK to ON.)
TIME
DATE
01/01/99
AUTO CLOCK ON
PBS CH.
AUTO
D.S.T.
AUTO
TIME ZONE
AUTO
TO SET PUSH ÀV THEN >/OK
TO END PUSH EXIT
4
Press the FF ►/OK button to select PBS CH.
Press the PLAY
A
or STOP
V
button repeatedly to select
the station number of your PBS channel.
6
Prei
7
Press the EXIT/STATUS button.
An on-screen message will ask you to turn off the VCR.
Press the POWER button to turn off the VCR.
Auto will flash in the display panel until the clock is set. Leave the
VCR power off until the clock is set.
If— :— appears on the display panel after you turn off the VCR,
the VCR could not find the time. Repeat steps I - 6 above, enter
ing a different PBS channel at step 5. Or, use a different method to
set the clock.