Press the stop ▼ button to stop playback, Press the rew(ind)^ button to rewind the tape, Press the eject button to remove the tape – Philips VRA456AT User Manual
Page 28: 28 playing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
28 Playing
Read and follow the steps below to play a tape.
I
Turn on the TV and set it to channel 3 or 4, whichever chan
nel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The power will come on.The VCR
will place itself in VCR position automatically (the VCR light will
appear on the display panel of the VCR). If the VCR light does not
appear, press theVCR/TV button once. If the tape’s record tab has
been removed, playback will start automatically.
3
If playback does not start automatically, press the PLAY
A
button. The
\>
light will appear on the VCR display panel.
4
Press the STOP ▼ button to stop playback.
Press the REW(ind)^ button to rewind the tape.
6
Press the EJECT button to remove the tape.
1
2
Turn on the TV.
Insert a tape.
Helpful Hint
Playback options and features are
on pages 42-48 and 5
/.
This VCR is equipped with SQPB (S-
VHS Quasi Playback) that lets you
watch tapes recorded in the
S-VHS format with regular VHS res
olution.
•
SQPB does not deliver Super
VHS resolution.
•
S-VHS quality recording is not
possible with this VCR.