External recording, Un)finalizing, erasing, Automatic track increment – Philips FWR8R37 User Manual
Page 28: Finalizing cdr(w) discs, Auto finalizing, Manual finalizing when recording is in progress, Manual finalizing when recording is stopped, Manual recording, Finalizing cdriw) discs, External recording (un)finalizing, erasing j
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EXTERNAL RECORDING
(UN)FINALIZING, ERASING
J
Automatic track increment
35
'
In recording mode, tracks will be incremented automatically so
that the track numbers are in the same position as the original.
• To
switch
the automatic track increment function
on,
press
as often as necessary TRACK INCR. on the remote control
during stop when CDR is selected.
-►flu to Tr OH is displayed and the function is on. Track
increments are now automatically detected from digital
source material. In analog source material, a silence of
2.7 seconds or more is detected as a track increment.
• To
switch
the automatic track increment function
off,
press
as often as necessary TRACK INCR. on the remote control
during stop when CDR is selected.
-►fluto Tr OFF is displayed and the function is off.
Track numbers can now be incremented manually by
pressing TRACK INCR. on the remote control during
recording. The minimum track length is 4 seconds.
Notes: - Track numbers cannot be changed after recording.
- The automatic track increment only works with
consumer sources with a digital output signal
according to the lEC 958 (consumer part) audio
standard. DAT, DVD and DCC do not deliver this
signal.
Finalizing CDR(W) discs
|
Finalizing a CDR(W) disc is a simple procedure, necessary to:
- play a recorded CDR on a standard CD player,
- play a recorded CDRW on a CDRW compatible CD player
and CD recorder,
- avoid further unwanted recordings on a disc, or
- avoid erasure of tracks on a CDRW.
Notes: - Finalizing will take about 2-4 minutes.
- After finalization of the CDR(W),
cdr
(
w
)
changes to
CD
on the display.
- During finalization no other operating commands
can be executed.
Auto finalizing
When using either CD—CD or COMPILE CD, your recordings
will be finalized automatically (see "Fligh speed recording and
automatic finalizing").
Manual finalizing when recording is in progress
1 Press FINALIZE on the unit during recording.
-►flu to Fi na 1 ? is displayed.
2 Press YES to confirm.
-►FINALIZE
is shown. The finalization will start after recording
and the actual finalizing time left will start to count down.
Manual finalizing when recording is stopped
1 Insert the CDR(W) you want to finalize in the CD recorder tray.
2 Press CDR to select the CD recorder.
3 Press FINALIZE on the unit.
-►Final ize? is displayed.
4 Press YES to start finalizing.
-►FINALIZE
is shown. Final is displayed and the actual
finalizing time left starts to count down.
22