Basic functions, Selecting a disc on the cd changer, Selecting a track and searching – Philips FWR8R37 User Manual
Page 20: Selecting a track when playback is stopped, Searching for a passage during playback, Shuffle and repeat, Playing tracks in random order, Cd text i, Cd text when playback is stopped, Cd text during playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC FUNCTIONS
[Selecting a disc on the CD changer
• Press either CD 1, CD 2 or CD 3 to select a particular disc.
Selecting a track and searching
Selecting a track during playback
• Rotate N JOG CONTROL N (press M or N on the remote
control) to skip to the beginning of the previous or next track
on the selected disc.
-►Playback continues with the selected track.
Selecting a track when playback is stopped
1 Rotate M JOG CONTROL ►! (press N or M on the
remote control) to skip to the required track number.
2
Press ► PLAY/PAUSE ( ► on the remote control) to start
playback.
-►Playback starts with the selected track.
Note: Instead of using N or M on the remote control, you can
also directly key in the required track number by using the
numerical keys. For 2-digit numbers, press the keys in
rapid succession.
Searching for a passage during playback
1 Keep ◄◄ SEARCH or ►► SEARCH (◄◄ or ►► on the remote
control) pressed to find a particular passage in a backward
or forward direction.
-►Searching is started and playback continues at a low
volume. After 3 seconds, the search speeds up with
volume muted.
2
Release the key at the desired passage.
-►Normal playback continues.
Note: During SHUEELE, while repeating a track or while playing
a program, searching is only possible within the current
track.
SHUFFLE and REPEAT
Repeating a track, the disc or the program
1 Repeatedly press REPEAT on the remote control during
playback to select either:
-►REPEAT
track
:
The current track is played repeatedly.
-►REPEAT
disc
:
The entire selected disc is played repeatedly.
-►REPEAT ALL
All discs in the CD changer (or the program)
are (is) played repeatedly.
2
Playback starts in the chosen mode.
3
To return to normal playback, press REPEAT on the remote
control until the display indication disappears.
Note:
REPEAT
disc
is not possible during SHUEELE or while
playing a program.
Playing tracks in random order
1 Press SHUEELE on the remote control during playback.
-►SHUFFLE
is shown and either all tracks of the program or
of the loaded disc(s) in the CD changer or CD recorder
are played in random order.
2
To return to normal playback, press SHUEELE again.
CD text
I
This feature allows the display of information such as album
title or track title contained on a specially encoded CD.
• Make sure to insert a CD with CD text.
-►CD TEXT
is shown and the album title is scrolled once.
CD text when playback is stopped
• Press CD TEXT on the unit to see the following information,
which will be scrolled once (if available):
- Album title
- Artist's name on album
CD text during playback
• Press CD TEXT on the unit to see the following information,
which will be scrolled once (if available):
- Artist's name on track
(on CD recorder only)
- Track title
Microphone mixing
1
Set MIC LEVEL to the minimum level to prevent acoustic
feedback (e.g. a loud howling sound) before you connect the
microphone.
2
Connect a microphone to MIC.
3
Press CD 1, CD 2, CD 3, CDR, TUNER or
DIGITAL / ANALOG AUX to select the source with which
you wish to mix the microphone.
4
Play the selected source.
5
Adjust the volume using MASTER VOLUME.
6
Adjust the desired mixing level between the source and the
microphone by turning MIC LEVEL.
7
Start singing or talking through the microphone.
Note: Keep the microphone away from the speakers to
prevent a howling sound.
14