Manual microphone recording, External recording, Flux – Philips FWR8R37 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EXTERNAL RECORDING
Manual recording
Manual recording from an external source
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Repeatedly press DIGITAL / ANALOG AUX to select the
input for the external source from which you want to record.
-►flUH Digital is displayed if the digital Input is
selected.
-►flux
Analog is displayed if the analog input is selected.
3
Press REC TYPE on the unit to enter the recording menu.
4
Rotate
N
JOG CONTROL
N
to select the type of recording.
-►flUX Manual?: for manual start of recording
5
Press YES to confirm your selection.
-►Wait is displayed.
-►Recor
d
?,
flux
and the remaining recording time of
the CDR(W) are displayed.
6
Start playback on the external source in order to set the
optimal recording level on the CD recorder (see
"REC LEVEL key").
7
Stop playback on the external source.
8
Go to the beginning of the desired track.
9
Press YES on the unit and simultaneously start playback on
the external source.
-►The CD recorder starts to record and
recording
in
PROGRESS
is shown. The remaining recording time of the
CDR(W) is displayed.
Note: /f Check Input is flashing, check the digital
connection.
10
Press
■
STOP on the unit to stop recording.
-►Update is displayed and
recording
in
progress
goes off.
Manual microphone recording
1
Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Set MIC LEVEL to the minimum level to prevent acoustic
feedback (e.g. a loud howling sound) before you connect
the microphone.
4
Repeatedly press DIGITAL
/
ANALOG AUX to select the
input for the external source with which you wish to mix
the microphone.
-►flux Digi tal is displayed if the digital input is
selected.
-►flux Analog is displayed if the analog input is selected.
5
Press REC TYPE on the unit to enter the recording menu.
6
Rotate
M
JOG CONTROL
N
to select the type of recording:
-►flux Mi.-i Mic: the microphone is mixed with the
external source.
-►Mic Only: only the microphone is recorded.
7
Press YES to confirm your selection.
-►Wait is displayed.
-►Record?,
flux and the remaining recording time of
the CDR(W) are displayed.
8
Set the optimal recording level on the CD recorder (see
"REC LEVEL key").
• In addition, you can also set the optimal recording level
of the microphone by turning MIC LEVEL.
9/7flux Mix
\ ] i c is selected:
Press YES on the unit and simultaneously start playback on
the external source.
-►The CD recorder starts to record and
recording
in
PROGRESS
is shown. The remaining recording time of the
CDR(W) is displayed.
Ifn
i c On 1 y
is selected:
Press YES on the unit to start recording.
-►The CD recorder starts to record and
recording
in
PROGRESS
is shown. The remaining recording time of the
CDR(W) is displayed.
10
Press
■
STOP on the unit to stop recording.
-►Update is displayed and
recording
in
progress
goes off.
M
"
bj
DO NOT FORGET TO FINALIZE!
Finalizing a CDR(WI disc is a simple procedure, necessary to:
- play a recorded COB on a standard CD player or
- play a recorded CDRW on a CDRW compatible CD player
and CD reborder.
3
Connect a microphone to MIC.
21