Philips FWR8R37 - Manual (Page 24)

INTERNAL RECORDING
3
(B
M
High speed recording * •
High speed recording of an entire disc, a track, a
program or a track edit
1
Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Press either CD 1, CD 2 or CD 3 to select the disc from
which you wish to record.
3 Press REC TYPE on the unit to enter into the recording menu.
4 Rotate N JOG CONTROL N to select one of the
following high speed recording modes:
/fa disc from the CD changer is selected:
-►CD F.ast.?: for high speed recording of an entire disc
• Continue with step 5.
-►Tr.ack F.ast?; for high speed recording of a track
• Press YES to confirm.
• Rotate N JOG CONTROL N to select the track.
-►F'ec Tr and the track number is displayed.
• Continue with step 6.
If CD changer program mode is available:
-►Prog Fast?; for high speed recording of the selected
disc or of the program
If CD changer track edit mode is available:
-►H-B Fast?: for high speed recording of the A-B track
5 Press YES to confirm your selection.
-►Both decks will be selected in the display, the arrow
starts blinking. The remaining recording time of the
CDR(W), the total recording time of the CDR(W) and
either Record CD 1 (or 2, 3)?, Record Prog? or
Record fi-B? is displayed.
Note: When the CDR(Wj already contains a recording, ALC
will also become active and
alc
will be shown.
6 Press YES to start high speed recording.
-►The arrow lights, recording in progress is shown, high
speed recording starts and the actual recording time
remaining starts to count down,
• To stop recording, press ■ STOP on the unit.
|Normal recording and listening
Normal recording and listening of an entire disc, a
track, a program or a track edit
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Follow steps 2 and 3 of "High speed recording".
3 Rotate M JOG CONTROL ►! to select one of the
following normal record options:
If CD changer is selected:
-►CD Listen?: for listening to the entire disc during
normal recording
-►Tr.3ckListen?: for listening to the track during
normal recording
• Press YES to confirm,
• Rotate N JOG CONTROL N to select the desired
track.
-►Rec Tr and the track number is displayed.
• Continue with step 6 of "High speed recording".
If CD changer program mode is available:
-►Prog Listen?: for listening to the program during
normal recording
If CD changer track edit mode is available:
-►fl-B Listen?: for listening to the A-B track during
normal recording
4 Follow steps 5 and 6 of "High speed recording".
• To stop recording, press ■ STOP on the unit.
DO NOT FORGET TO FINALIZE!
Finalizing a CDH(Wj disc is a simple procedure, necessary to:
- play a recorded CDR on a standard CD player or
- play a recorded CDRW on a CDRW compatible CD player
and CD recorder.
18