Microtel MicroWin 2000EX - Manual (Page 48)

MicroWin 2000EX Manual
42
Setup S1000EX to Call MicroWin 2000EX
If you want a particular dialer to call a MicroWin 2000EX to report some alarm condition, a
special telephone escape sequence will need to be added to the telephone number. The escape
sequence *990 code should be placed at the beginning of the telephone number. It will be needed
in order for the dialer to know that it is calling a MicroWin 2000EX System. If it is not added, it
will try and talk in voice to your computer’s modem, which will Not work. It is important to
configure each dialer with a unique Telephone (Fax Identification Number) and MicroWin
2000EX must have made at least one call-out to that dialer and the dialer must have been sent the
latest configuration.
Auto Answer on the Edit MicroWin tab must be Enabled for MicroWin 2000EX to accept a
Callin.