Microtel MicroWin 2000EX - Manual (Page 37)

MicroWin 2000EX Manual
31
There is an easy way to set Every Day or just Weekdays to a particular call at time. Simply
enter the time in the box shown below and click on the button next to the Every Day label or
Weekdays label. This will update the days appropriately.
Call Periods
A dialer’s call outs can be limited to certain times of the day. For a particular day, it can be
Enabled or Disabled between the programmed time frame. Also, it can be set to always enabled
(Always) or disabled (Never) for call outs during a day.
There is an easy way to set every days Enable or Disable time frame. Simply enter the desired
time frame in the boxes shown below and click on the button next to the Enable All label or
Disable All label. This will update the days appropriately.
Save / Default / Cancel
At the bottom of the form, there are the standard Save/Default/Restore/Cancel buttons.
Save will save the edits that were made and move back to the Edit Entry Configuration form.
Default will reset all the settings back to the system defaults. A dialog will ask if this is the
desired action.
Cancel will cancel all the edits that have currently been made on this form. A dialog will ask if
this is the desired action.