Compaq AP500 User Manual
Page 73
3-53
Compaq Professional Workstation AP500 Maintenance and Service Guide
5.
Replace the I/O bracket assembly and the side access panel.
6.
Place the sticker included with your battery kit on the back of the workstation above the
power connector.
7.
Plug in the workstation and reconnect any external devices.
WARNING: This equipment is designed for connection to a grounded (earthed)
outlet. The grounding type plug is an important safety feature. To avoid the risk of
electrical shock or damage to the equipment, do not disable this feature.
8.
Turn on the workstation.
9.
Run computer setup to reconfigure the system.
■
If the workstation has a Compaq hard drive, you have now successfully completed the
installation.
■
If the workstation has a third-party hard drive, you must reconfigure the hard drive using
the parameters recorded earlier.