Compaq AP500 User Manual
Page 51
3-31
Compaq Professional Workstation AP500 Maintenance and Service Guide
Removing a 10,000-rpm Hard Drive from Bays 5 or 6
Drive bays 5 and 6 can be configured with a 10,000 rpm hard drive. The removal of the drive is
basically the same as removing a 7200 rpm hard drive except you will be also be removing a
cooling fan. :
To remove a 10,000-rpm hard drive:
1.
Perform the service preparations shown on page 3-2.
2.
Remove the following components:
❏
Side access panel
❏
Front bezel
3.
Disconnect the signal and power cables.
Figure 3-27. Disconnecting the cables from the hard drive