Compaq AP500 - Manual (Page 128)

5-9
Compaq Professional Workstation AP500 Maintenance and Service Guide
6. In the Computer Setup windows, click Built-in Devices.
7. In the Built-in Devices window, click Security Management.
8. Under Power-On Password, select Enable QuickLock of the Keyboard, then select
QuickBlank the screen when locked and/or Initiate QuickLock when entering Energy
Saver mode.
NOTE: To use Initiate QuickLock when entering Energy Saver Mode, the Power Management
option must be enabled.
9. Save the configuration and exit the utility.
10. Restart the workstation.
Disabling the Keyboard and Mouse Interface
Enter the QuickLock key combination (Ctrl+Alt+L) to disable the keyboard and mouse (or
other input device connected to the mouse connector). The applications you are running cannot
be accessed, but remain in view unless the QuickBlank feature is also enabled through the
Computer Setup utility.
Enabling the Keyboard and Mouse Interface
To enable the keyboard and mouse interface or other input device, enter the Power-On
Password.
Cable Lock Provision
The workstation is equipped with a cable lock provision to secure the unit to a fixed object
and/or inhibit access to the interior of the unit. If a cable lock or padlock is installed, you must
remove it before servicing the workstation. See the “Service Preparations” section in Chapter 3
for removal procedures.