Diskette drive – Compaq AP500 User Manual
Page 46
3-26
Removal and Replacement Procedures
Diskette Drive
IMPORTANT: Before removing the diskette drive, be sure there is no diskette in the drive.
To remove the diskette drive:
1.
Perform the service preparations shown on page 3-2.
2.
Remove the following components:
❏
Side access panel
❏
Front bezel
3.
Disconnect the cables from the back of the diskette drive.
Figure 3-21. Disconnecting the cables from the back of the diskette drive
4.
Remove the diskette drive retaining screws.